Basic Info.
Structure Material
Metal Material
Principle
Induction Heating
Application
Hardening/Welding/Melting/Annealing
Work Power
Three Phase380
Continuous Load Rate
100%
Name
IGBT Induction Heating Machine
Transport Package
Standrad Wooden Case
Product Description
Advanced Technology Induction Heating Hot Forging Machine for Steel Pipe
Definition
What is induction heating?
Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, through heat generated in the object by eddy currents (also called Foucault currents).
An induction heater consists of an electromagnet, and an electronic oscillator that passes a high-frequency alternating current (AC) through the electromagnet.The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor called eddy currents.
The eddy currents flowing through the resistance of the material heat it by Joule heating.In ferromagnetic (and ferromagnetic) materials like iron, heat may also be generated by magnetic hysteresis losses.
Main Parts Introduction
1) Germany SIEMENS INFINEON IGBT Module(40-60KHZoscillation frequency,fast response time, high arcstability, almost spatter-free welding)
2) Japan Nichicon electrolytic capacitor(filter capacitor)
3)signal circuit, drive circuit board ,control circuit board and components are adopted:Toshiba, Hitachi,Motorola,China's top manufacturers
4)international advanced all-solid-state semiconductor power devices
5)imported transistor integrated block
6)high speed control tube
7)with perfect control,protection,alarm display circuit,machine could get full automatic tracking frequency, continuous adjustable power,safe and dependable protection,clear and accur data display and etc technical advantage
8)according to the frequency and power,we offer various model of different types and design.
9) Superiority :fast heating,wide application,portable volume,easy installation,simple operation
10)Wide applied to different kind of work piece melting,annealing,welding,quenching,forging,hardening and other heat treatment.
Model | WH-VI-80 |
Rated Power output | 80KW |
Frequency rang | 10-40 KHz |
Three- phase input | Three-phase 380V /50HZ |
Current input | 120A |
Efficiency | 95% |
Duty cycle | 100% |
Cooling water flow | Hydraulic pressure≥0.2MPa,flow rate:5-20L/Min |
Cooling water temperature | ≤ 50°C |
Waterway of power supply | Control box:2 inlets ,2 outlets |
Application | Quenching, annealing, conditioning saw blades, drill, turning welding standard parts of axial Etc fastener local heating, forging, melting, high frequency induction heating equipment. |
Application range:
Heat Treatment (surface hardening, quenching, annealing, tempering)
1. Hardening parts of automobile, motorbike, mold, agricultural machinery.
2. Quenching machinery parts, such as: all kinds of gear wheel, chain wheel.
3. Hardening the industrial of machine tool, such as bed guide way of machine tool.
4. Heat treatment pliers, spanner, screwdriver, drill, axes, spiker
5. Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products.
Welding
1.welding diamond saw blade, carbide saw blade welding and diamond cutting tools, grinding tools, drilling welding.
2. carbide cutting tools for machining welding. Such as turning, milling cutter welding.
3. mining tools, welding, such as "one" bits, pillar gear drill bits, dovetail coal drill bits, drill rods riveting, all kinds of shearer, a variety of shearer, boring machine pick a variety of welding.
4.The welding of various wood working tools, such as various woodworking planer, milling, and welding a variety of woodworking drill.
Forging
Hot forming all kinds of standard parts, fasteners, machinery parts, hardware tools, straight shank twist drill of hot forging, hot rolling, metal annealing. Such as: tensile steel; wire, nail wire heating; stainless steel annealed.
Why use induction heating?
1.Induction heating is a GREEN process as it does not emit fumes or CO2 into the environment, emissions are controlled by the electricity generating company at one site and are easy to monitor.
2.The result of only a small proportion of the material being heated, commonly less than 5% of the mass being heated to accomplish the required properties, then there is less energy consumed, overall, to heat treat the component when compared with conventional furnace heat treatment methods.
3.Again due to the small areas heated there is a considerable reduced heat treatment distortion so much so that the majority of the components we heat treat are ready to assembly after heat treatment.
4.Grinding costs can constitute 25~30% of the total cost of a component. Modern CNC lathes can turn components more accurately to size than they can be ground and with a better surface finish. Save money by specifying induction hardening.
5.Some components require some areas to remain soft after heat treatment. This can only be achieved in a furnace by 'stopping off' the component. The 'stopping off' technique alone is usually more expensive than the most of the induction hardening process and the induction process only hardens the portions required to be hard.
Our Services
Pre-sale service:
We will recommend the most suitable machine for customers according to their requirements
In-sale service:
(1) We will strictly manufacture the machine according to relevant technical standards.
(2) We will take run test according to relevant equipment test run regulations.
(3) We will strictly check up the machine, before delivery, only good machine will be sent to customers.
(4) We will delivery on time.
After-sale service:
(1)We will be free to guide the installation, commissioning and test run, by sending the installation drawings, and sometimes to call or send e-mail.
(2)We will carry out a one-year warranty period (e.g. excluding normal wear and tear parts and parts damage compensation caused by improper operation.
(3)We will be free to replace all equipment components during warranty period. The potential problems of customer service and customer service after sales.
(4)Provide long term technical support. Also for different work pieces, to guide and help to produce the inductor.
FAQ
1. Which countries your products are exported to?
Our products have been sold all over the world and with related certifications.
2. How about the warranty?
All our products have one year quality warranty, during the warranty period, the spare parts for replacement are free. And we provide life long technical support and other assistance.
3. How to install your machine?
We have installation instruction papers and videos, we will teach till you can do it yourself.
4. What about delivery?
We offer assistance on seeking best shipping way and suitable forwarder .
Any loading port and any destination city address are both OK for us.
5. How about the payment terms and delivery time?
Payment terms for any machines: 100% T/T/ Western Union/ESCROW with buyer protection.
We have machine in stock,so we surely will send out the machine after getting payment in one day ,if no any special adjustment request from clients.
6. If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade website and it has run very well these years.
Every supplier on it has paid a large amount membership fee, and spare much effort to manage their business well.
We have Chinese business licenses which can be checked on Chinese official website or we can show it to you,and these licenses are also kept back-up on Alibaba
If we do anything illegal without honest,we would get punished very badly after you Sued us.so that your concern will never appear, please do not worry.
7. Is your goods has CE certificate?
Yes, all our goods has CE certificated. All machines are high quality goods.
8. What is your company: Trader or Manufacturer ?
We are manufacturer and have a big factory , warmly welcome to visit our factory and contact us.
Contact Information
Michelle
Sales Manager
Tel:0086-18937170169
http://induction-heatings.en.made-in-china.com
Address:
No. 68, Jingnansi Road, Economic and Developing Zone, Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, QHSE, BS 25999-2, IFS
Company Introduction:
Our company specializes in quenching, furnace, high frequency quenching, high frequency quenching furnace, hardening equipment. Using the German original Siemens IGBT power module, FUJI rectifier module, power output of epoxy resin cast transformers, 24 hours of continuous work. Effects of electromagnetic theory, the alternating magnetic field in the metal material within the rapidly induces a large eddy, so that the molten metal temperature until an electric induction heating equipment, but also penetrate non-metallic materials, metal materials or local All the rapid heating.
Old-fashioned high-frequency induction furnace, high voltage step-up access is by a direct step-up transformer for AC 380V, and its poor security, huge in size and power consumption, high maintenance costs of traditional coal oven heating, box-type electric heating, oxyacetylene heating equipment, welding and heat treatment, not only pollute the environment, waste energy, but slow and inefficient.
A new generation of high-frequency micro-power license induction heating power supply, completely changed the above-mentioned shortcomings, is the price recommended by the best environmental engineering heating equipment.