Basic Info.
Type
Induction Annealing Machine
Certification
CE, ISO, RoHS, UL
Cooling Water Pressure
0.2MPa
Generator Size
700*500*860mm
Transformer Size
450*350*100mm
Application
Annealing, Heating
Transport Package
Wooden Case
Product Description
Fast Heating Iron Pipe Annealing Induction Heat Treatment Machine (WH-VI-60KW)
Main Feature:
1. Adoping IGBT inverting device: High frequency, the output power is big.
2. The absolute load merit rate design, can work continuously for 24 hours.
3. The digital phase locked realizes following frequency automatically.
4. Design in modules. It is installed facility and use conveniently without debegging.
5. The perfect protection function, insuring the reliability and easily maintaining of the equipments.
6. The technique of converting frequency by resonance promotes efficiency of whole equipment by over 95%. High efficience.
7. Economy and enviromental protection, it can replace of the gas/coal/electronic tube induction heating machine.
8: Application: Forging, quenching, annealing etc.
Advantage
Nearly 20 years experience, stable and goods performance
CE,SGC,FCC,ROSH certificated
Cooperated with GM,VOLVO,HONDA and so on.
Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
Less environment pollution
High efficiency,high output&high reliability
Small size &light weight
Main Parts Introduction
1.Germany SIEMENS INFINEON IGBT Module(40-60KHZoscillation frequency,fast response time, high arcstability, almost spatter-free welding).
2. Japan Nichicon electrolytic capacitor(filter capacitor).
3.signal circuit, drive circuit board ,control circuit board and components are adopted:Toshiba, Hitachi,Motorola,China's top manufacturers.
4.international advanced all-solid-state semiconductor power devices.
5.imported transistor integrated block.
6.high speed control tube.
7.with perfect control,protection,alarm display circuit,machine could get full automatic tracking frequency, continuous adjustable power,safe and dependable protection,clear and accur data display and etc technical advantage.
8.according to the frequency and power,we offer various model of different types and design.
9. Superiority :fast heating,wide application,portable volume,easy installation,simple operation.
Technical parameters
Model | WH-VI-40 | WH-VI-50 | WH-VI-60 |
Work power | Three phrase 380v/50-60Hz | Three phrase 380v/50-60Hz | Three phrase 380v/50-60Hz |
Max input current | 62A | 75A | 90A |
Max output power | 40 kw | 50 kw | 60 kw |
Cooling water pressure | 0.1-0.3mpa | 0.1-0.3mpa | 0.1-0.3mpa |
Host weight | 45kg+/-5% | 55kg+/-5% | 65kg+/-5% |
Transformer weight | 29kg+/-5% | 35kg+/-5% | 50kg+/-5% |
Efficiency | 100% | 100% | 100% |
Temperature protection | 50 degree | 50 degree | 50 degree |
Application range:
Heat Treatment (surface hardening, quenching, annealing, tempering)
1. Hardening parts of automobile, motorbike, mold, agricultural machinery.
2. Quenching machinery parts, such as: all kinds of gear wheel, chain wheel.
3. Hardening the industrial of machine tool, such as bed guide way of machine tool.
4. Heat treatment pliers, spanner, screwdriver, drill, axes, spiker
5. Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products.
Our Services
Pre-sale service:
We will recommend the most suitable machine for customers according to their requirements.
In-sale service:
1.We will strictly manufacture the machine according to relevant technical standards.
2. We will take run test according to relevant equipment test run regulations.
3. We will strictly check up the machine, before delivery, only good machine will be sent to customers.
4. We will delivery on time.
After-sale service:
1We will be free to guide the installation, commissioning and test run, by sending the installation drawings, and sometimes to call or send e-mail.
2We will carry out a oneyear warranty period (e.g. excluding normal wear and tear parts and parts damage compensation caused by improper operation.
3.We will be free to replace all equipment components during warranty period. The potential problems of customer service and customer service after sales.
4.Provide long term technical support. Also for different work pieces, to guide and help to produce the inductor.
Why use induction heating?
1. Induction heating is a GREEN process as it does not emit fumes or CO2 into the environment, emissions are controlled by the electricity generating company at one site and are easy to monitor.
2. The result of only a small proportion of the material being heated, commonly less than 5% of the mass being heated to accomplish the required properties, then there is less energy consumed, overall, to heat treat the component when compared with conventional furnace heat treatment methods.
3. Again due to the small areas heated there is a considerable reduced heat treatment distortion so much so that the majority of the components we heat treat are ready to assembly after heat treatment.
4. Grinding costs can constitute 25~30% of the total cost of a component. Modern CNC lathes can turn components more accurately to size than they can be ground and with a better surface finish. Save money by specifying induction hardening.
5.Some components require some areas to remain soft after heat treatment. This can only be achieved in a furnace by 'stopping off' the component. The 'stopping off' technique alone is usually more expensive than the most of the induction hardening process and the induction process only hardens the portions required to be hard.
Contact us:Lucia
phone number:+86 15225195652
Address:
No. 68, Jingnansi Road, Economic and Developing Zone, Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, QHSE, BS 25999-2, IFS
Company Introduction:
Our company specializes in quenching, furnace, high frequency quenching, high frequency quenching furnace, hardening equipment. Using the German original Siemens IGBT power module, FUJI rectifier module, power output of epoxy resin cast transformers, 24 hours of continuous work. Effects of electromagnetic theory, the alternating magnetic field in the metal material within the rapidly induces a large eddy, so that the molten metal temperature until an electric induction heating equipment, but also penetrate non-metallic materials, metal materials or local All the rapid heating.
Old-fashioned high-frequency induction furnace, high voltage step-up access is by a direct step-up transformer for AC 380V, and its poor security, huge in size and power consumption, high maintenance costs of traditional coal oven heating, box-type electric heating, oxyacetylene heating equipment, welding and heat treatment, not only pollute the environment, waste energy, but slow and inefficient.
A new generation of high-frequency micro-power license induction heating power supply, completely changed the above-mentioned shortcomings, is the price recommended by the best environmental engineering heating equipment.