Germany Siemens IGBT Induction Heating Machine WH-VI-50KW
1.Fast Heating:The minimum rate of heating is less than one second(rate of heating is available for adjustment and control)
2.Wide coverage of heating:It can be used to heat various metal parts (replace removable induction coil as per different shape).
3.Easy Installation:It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
4.Easy operation:You can learn to operate it within several minutes.
5.Fast start-up: It can be started to perform heating operation on condition that water and power supply is available.
6.Low Power Consumption:As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%.
The smaller the size of the work pieces, the lower power consumption would
7.High Effectiveness:It has such features as uniform heating ( it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece ),fast warming and limited oxic horizon, and can gurad against any waste after annealing.
Technical Parameter of Induction Heating Machine:
|Work power||Three phase 380V/50Hz|
|Working voltage range (AC)||342V~430V|
|Max input current||75A|
|Max output power||50KVA|
|Continuous load rate||100%|
|Cooling water pressure||0.1-0.3mpa|
|Cooling water flow(host)||20L/min(0.1mpa)|
|Cooling water flow(transformer)||18L/min(0.1mpa)|
|Transformer dimensions (L*W*H)mm||420*355*450|
|Particular recommended||Stand hot forging quenching welding|
|Temperature protection||50 degrees|
Application of Induction Heating Machine:
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork
3. Various electric tools, such as gear and axes.
4. Quench for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.